










Intro to ILL Application Standards
ISO 10160 Service Definition
ISO 10161-1 Protocol Specs
ISO 10161-2 PICS Proforma
Where to Purchase
ISO TC46/SC4/WG4
Maintenance Agency Procedures
Profiles
Clarifications
Review
For More Information,
contact
the ILL Application Standards Maintenance Agency,
Library and Archives Canada
ill_asma @lac-bac.gc.ca
Last Update: 2004/08/13
|
Interlibrary Loan Application Standards Maintenance Agency
ISO 10161-1
Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 1: Protocol Specification
Edition 2 (1997)
- The 2nd edition of the Protocol Specification (ISO 10161-1) was published by ISO in Summer 1997;. It incorporates the changes specified in Defect Reports 1-23 and in ISO 10161:1993 Amendment 1.
ISO 10161-2:1997 Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 1: Protocol Specification
- ISO catalogue description:
http://www.iso.ch/iso/en/CatalogueDetailPage.CatalogueDetail?CSNUMBER=22248
Transfer Syntax
Currently there are two encoding schemes applied to the data type values defined in the ASN.1 specified in ISO 10161-1. The mandatory encoding scheme is the Basic Encoding Roules for Abstract Syntax Notation One (defined in ISO 8825-1). A second encoding scheme, EDIFACT is used by some early implementations of the ILL protocol.
Amendments
The following Amendments have been issued for ISO 10161-1:1997
Amendment 1 (to edition 2): Extension "identifier"
- Amendment 1 to edition 2 of ISO 10161-1 allows for the use of Object Identifier in the "Identifier" parameter of the Extension data type.
- Status: Approved
- PDF Version:
-
http://www.niso.org/international/SC4/n495.pdf
- Report of Voting on ISO 10161:1997/DAmd 1
-
http://www.niso.org/international/SC4/n492.pdf
Amendment 2 (to edition 2): Maintenance Agency
- Amendment 2 to edition 2 of ISO 10161-1 adds Annex H acknowledging the National Library of Canada as the Maintenance Agency for ISO 10161-1.
- Status: Approved
- PDF Version:
-
http://www.niso.org/international/SC4/n496.pdf
- Report of Voting on ISO 10161:1997/DAmd 2
-
http://www.niso.org/international/SC4/n493.pdf
Defect Reports
- In the course of protocol implementation, problems may be identified in the ILL Application Protocol Specification. Corrections are issued in a series of defect reports.
The following Defect Reports have been issued for to ISO 10161-1:1997.
10161-1:1997 Defect Report 1
- Clerical defect, adding "EXPind" to Table A-2 Outgoing Event List.
- PDF version:
-
http://www.lac-bac.gc.ca/iso/ill/document/standard/161dfc01.pdf
10161-1:1997 Defect Report 2
- Clerical defect, requires reformatting of cell in Table A-5a
- PDF version:
-
http://www.lac-bac.gc.ca/iso/ill/document/standard/161dfc02.pdf
10161-1:1997 Defect Report 3
- Clerical defect, requires reformatting of cell in Table A-5b
- PDF version:
-
http://www.lac-bac.gc.ca/iso/ill/document/standard/161dfc03.pdf
10161-1:1997 Defect Report 4
- Clerical defect, requires correction of names of incoming events in Tables A-6 and A-9
- PDF version:
-
http://www.lac-bac.gc.ca/iso/ill/document/standard/161dfc04.pdf
10161-1:1997 Defect Report 5
- Editorial defect, requires revision of text of Clause 8.2.2 and Annex A. Table A-4 Requester State Table - Processing Phase and Table A-5 Requester State Table - Tracking Phase to resolve inconsistency between the transition from the processing phase to the tracking phase of an ILL transaction as described in clause 8.2.2 and the state transitions permitted by the requester state tables (A4 and A5) in Annex A.
- PDF version:
-
http://www.lac-bac.gc.ca/iso/ill/document/standard/161dfc05.pdf
10161-1:1997 Defect Report 6
- Technical defect, requires revision of cell formed at the intersection of the incoming event "SHIreq repeat" and the "Shipped" state in Table A.7, to include annotation that the outgoing SHIPPED APDU is optional.
- PDF version:
-
http://www.lac-bac.gc.ca/iso/ill/document/standard/161dfc06.pdf
10161-1:1997 Defect Report 7
- Clerical defect, requires reversal of order of rows for "CAR- repeat" and "CAR-" in Table A.4, bottom of page 58 in ISO 10161-1:1997(E)
- PDF version:
-
http://www.lac-bac.gc.ca/iso/ill/document/standard/161dfc07.pdf
10161-1:1997 Defect Report 8
- Minor editorial defect, requires additions to tables A-3 and A-5 in ISO 10161-1:1997 (E)
- PDF version:
-
http://www.lac-bac.gc.ca/iso/ill/document/standard/161dfc08.pdf
10161-1:1997 Defect Report 9
- Minor editorial defect, requires revision of three cells in Table A.8, Intermediary State Table - Requester Role, in ISO 10161-1:1997(E) to include annotation that the RETURNED APDU is optional.
- PDF version:
-
http://www.lac-bac.gc.ca/iso/ill/document/standard/161dfc09.pdf
10161-1:1997 Defect Report 10
- Editorial defect, requires revision of numerous cells in Tables A.6 Responder State Table - Processing Phase and A.9 Intermediary State Table - Responder Role, in ISO 10161-1:1997(E) to disable or enable the EXPIRY timer.
- PDF version:
-
http://www.lac-bac.gc.ca/iso/ill/document/standard/161dfc10.pdf
10161-1:1997 Defect Report 11
- Clerical defect, for External Object IPIG-system-number {1 0 10161 6 1} requires revision of upper-case letter in data type System-ID to lowervase to match the imported object System-Id
- PDF version:
-
http://www.lac-bac.gc.ca/iso/ill/document/standard/161dfc11.pdf
(Edition 1) 1993 Archived Amendments and Defect Reports
See the Maintenance Agency Procedures for preparing defect reports, amendments and clarifications.
|